Lithium Ion Battery - 12V 18Ah - With Protective Circuit Board - BSL12180

(No reviews yet) Write a Review
SKU:
BSL12.8-18
Condition:
New
Availability:
In Store or Shipping
  • Lithium Ion Battery - 12V 18Ah - With Protective Circuit Board - BSL12180 | Battery Specialist Canada
  • Lithium Ion Battery - 12V 18Ah - With Protective Circuit Board | Battery Specialist Canada
  • Lithium Ion Battery - 12V 18Ah - | Battery Specialist Canada
$329.95

Description

Lithium Ion Battery - 12V 18Ah - With Protective Circuit Board- BSL12180

Battery Specialist Lithium Iron Phosphate (LiFePO4) batteries are designed for 2,000 Cycles at 100% DOD. These batteries offer a significant longer cycle Life and longer float/calendar life than lead acid batteries while helping to minimize replacement cost and reduce total cost of ownership.

LiFePO4 batteries delivers twice the power of lead acid batteries, even high discharge rate, while maintaining high energy capacity. Rest assured that Under/Over voltage and current protection ensures safe and efficient operation and are designed to work with AGM chargers.

Battery Specialist LiFePO4 batteries represent an advancement in safety due to cell design including various safeguards such as high temp thermal fuse,
flame retardant additive, and pressure relief valves.

With Battery Specialist LiFePO4 batteries you have a drop-in replacement of lead acid batteries. Modular design enables deployment of up to four batteries
in series and up to ten batteries in parallel.

Features of LiFePO4 Battery

Longer Cycle Life: Offers a significant longer cycle life and longer float/calendar life than lead acid batteries helping to minimize replacement cost and reduce total cost of ownership.

Higher Power: Delivers twice the power of lead acid batteries, even high discharge rate, while maintaining high energy capacity.

BMS Protection: Under/Over voltage and current protection ensuring safe and efficient operation.

Charging: Designed to work with AGM chargers.

Safety: Advanced LiFePO4 cell design includes various safeguards including high temp thermal fuse, flame retardant additive and pressure relief valves.

Increased Flexibility: Battery Specialist LiFePO4 batteries are a "drop-in replacement" of lead acid batteries. Modular design enables deployment of up to four batteries in series and up to ten batteries in parallel.

SoC / Fuel Gauge: Optional LED state of charge display available.

Ultra Low Self Discharge Curve: <1% per month

Key Features

 Attractive cycle life
 Extended safety performance
 Wide operating temperature range
 Unrivalled high temperature performance
 Green energy without metal contaminant
 High capacity
 Steady output voltage
 Little self-discharge
 Double safety protection
 Withstanding very high level of vibrations and shocks

Safety Characteristics

 Over-charge/Over-discharge Ability to withstand over-charge/withstand over-discharge, and there is no fire, no exploding
 Short circuit Ability to withstand short circuit, and there is no fire, no exploding
 Acupuncture Ability to withstand nail puncturing, and there is no fire, no exploding
 Thermal shock Ability to withstand thermal shock, and there is no fire, no exploding

 Electrical Characteristics

Nominal Voltage:  12.8V
Nominal Capacity:  18Ah
Expected Cycle Life:   More than 3000 cycles, with 0.2C charge and discharge rate, at 25 ℃, 80%DOD

Mechanical Characteristics

Height: 181.5±2mm
Width: 77±1mm
Length: 181±5mm
Weight: ~2.5Kg

Operation Conditions
Charge Method: CC-CV
Max. Charge Voltage: 14.6V
Continuous Charge Current: Max.20A
Charge Temperature: 0℃~45℃
Continuous Discharge Current: Max. 20A
Peak Instant Discharge Current(10 Seconds): 40A
Discharge Cut-off Voltage: 10.0V
Discharge Temperature: -20℃~65℃
Storage Temperature: -20℃~45℃
Self Discharge (Stored at 50% SOC):<= 3%/month

Function of the Battery Management System

Circuit Protection: Cylindrical cells are optimized through the use of its battery PCM/BMS, through monitoring cells, to provide protection against overcharge, over discharge, short circuit. Also it enables every battery pack to obtain independent balancing function. Overall, the BMS helps to ensure safe and accurate Operation.

bsl12180-spec.png

 Storage and Transportation

1. Based on the character of cell, proper environment for transportation of LiFePO4 battery pack need to be created to protect the battery.
2. During transportation,50% SOC must be kept to ensure that short circuit, appearance of liquid in the battery or immersion of battery in liquid never occur.
3. Battery should be kept at -20℃~45℃ where it’s dry, clean and well-ventilated.
4. During loading of battery, attention must be paid against dropping, turning over and serious stacking.

Warnings & Tips

In order to prevent the battery leaking, getting hot and exploding, please pay attention to preventing measure as following:

Warning!
 Never throw the battery into water, keep it under dry, shady and cool circumstance when not use.
 Never upside down the positive and negative.
 Never connect the positive and negative of battery with
metal.
 Never ship or store the battery together with metal
 Never knock, throw or trample the battery.
 Never cut through the battery with nail or other edge tool.
Tips!
 Never use or keep the battery under the high temperature. Otherwise it will cause battery heat, get into fire or lose some function and reduce the life. The proposed temperature for long-term storage is 10-45℃.
 Never throw the battery into fire or heating machine to avoid fire, explosion and environment pollution; scrap battery should be returned to the supplier and handled by the recycle station.
 Never use the battery under strong static and strong magnetic field, otherwise it will destroy the protecting device.
 If battery leaked, the electrolyte get into eyes, please don’t knead, please wash eyes by water and send to hospital. Otherwise it will hurt eyes.
 If battery emit peculiar smell, heating, distortion or appear any unconventionality during using, storage or charging process, please take it out from device or charge and stop using.
 Never cut the battery in socket directly; please use the stated charger when charging.
 Check the voltage of battery and relevant connectors before using the battery. It can’t be used until everything turns out to be normal.
 Prior to charging, fully check the insulativity, physical condition and ageing status, since breakage and ageing are never allowed; the pack voltage must not be less than the cutoff voltage, if not, it’s abnormal and that battery needs to be labeled. The user should contact our Customer Service Dept and it can’t be charged until repaired by our staff.
 The battery should be stored in 50% SOC. It needs to be charged once if out of use for as long as half a year.
 Clean the dirty electrode, if any, with a clean dry cloth, or poor contact or operation failure may occur.

View AllClose

Warranty Information

Battery Specialist warrants your unit to be free from defects in material and workmanship for a period of 12 months from the date of sale to the original user or purchaser with the exception of abuse or misuse. This warranty is non-transferable. If your unit malfunctions or fails within 6 months because of a defect in material or workmanship, we will replace or repair the unit. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product or equal or greater value. This warranty excludes malfunctions or failures of your unit which were caused by repairs made by an unauthorized person, mishandling, modifications, normal wear, unreasonable use, or damage to the product. This warranty is in lieu of all other express warranties. The duration of implied warranty, including but not limited to any implied warranty or merchantability or fitness for a particular purpose made in respect to your unit is limited to the period of the express warranty set forth above. In no event will Battery Specialist Limited be liable for consequential or incidental damages.
View AllClose